Back to the overview
Your selection
We offer up to 3 free material samples. The samples come in 16 x 25 cm cut-outs.
Request samples
A furniture leather made from European bull pelts which is soft, full-grained, dyed in the tanning pit and covered with a pigmented finish. The embossing lends this leather a ni-form, crack-grained appearance. The leather is distinguished by its extremely high resilience with regard to light fastness, surface altera-tions caused by use as well as high resistance to liquids.
You have reached your maximum order quantity
Information & Downloads
174
tobacco
100
Remove dust once a week using a vacuum cleaner and/or a damp cloth. Clean the leather at least twice a year using a mild cleaning agent and then impregnate the leather using a leather-care cream. This protects the leather against stains, provides it with nutrients and ensures it remains smooth. Dry up any spilt liquids immediately using an absorbent cloth, without rubbing.
-
Leather strength
1,4 - 1,6 mmThe leathers in our range are available in thicknesses between 1.0 and 2.5 millimetres. That sounds like just a fine difference, but the effect of this wafer-thin difference actually has an enormous impact. Thicker leather gives furniture a more solid, tougher, more heavier impression. We therefore recommend it above all for models with large leather surfaces. Thinner leather is recommended for fine furniture and furniture with distinct seams.
-
Tanning
Mineral tanning (chrome)Mineral tanning (chrome tanning) is the most common method of tanning leather. About 80 per cent of all the leather tanned worldwide is tanned using chrome, which is obtained from chromium ore. Only trivalent chromium salts are used for tannage that are of no risk to health and that pollute as little as the vegetal tannage.
-
Lightfastness
6Lightfastness is the ability of a cover to withstand solar radiation. The scale ranges from 1 to 8, with 8 being the highest and best light fastness. The higher the lightfastness, the better the leather will withstand the sun's rays without losing colour. As a rule of thumb, however, you should not place your furniture in direct sunlight. Some leather fade faster than others, which can be seen from the light fastness.
- Information & Downloads
- Product images
- Fire protection certificates
Similar colored
